Datatype: rdf:PlainLiteral
Usage (714)
- ServiceInterface dcterms:description "Interface to the CloudService. Can be used to get data from the service or send commands to the service." @en
- Feature dc:contributor "Matthew Perry"
- Feature dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- Feature dc:description "
This class represents the top-level feature type. This class is
equivalent to GFI_Feature defined in ISO 19156:2011, and it is
superclass of all feature types.
" @en
- Feature rdfs:comment "
This class represents the top-level feature type. This class is
equivalent to GFI_Feature defined in ISO 19156:2011, and it is
superclass of all feature types.
" @en
- Feature rdfs:label "Feature" @en
- Feature skos:definition "
This class represents the top-level feature type. This class is
equivalent to GFI_Feature defined in ISO 19156:2011, and it is
superclass of all feature types.
" @en
- Feature skos:prefLabel "Feature" @en
- Geometry dc:contributor "Matthew Perry"
- Geometry dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- Geometry dc:description "
The class represents the top-level geometry type. This class is
equivalent to the UML class GM_Object defined in ISO 19107, and
it is superclass of all geometry types.
" @en
- Geometry rdfs:comment "
The class represents the top-level geometry type. This class is
equivalent to the UML class GM_Object defined in ISO 19107, and
it is superclass of all geometry types.
" @en
- Geometry rdfs:label "Geometry" @en
- Geometry skos:definition "
The class represents the top-level geometry type. This class is
equivalent to the UML class GM_Object defined in ISO 19107, and
it is superclass of all geometry types.
" @en
- Geometry skos:prefLabel "Geometry" @en
- SpatialObject dc:contributor "Matthew Perry"
- SpatialObject dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- SpatialObject dc:description "
The class spatial-object represents everything that can have
a spatial representation. It is superclass of feature and geometry.
" @en
- SpatialObject rdfs:comment "
The class spatial-object represents everything that can have
a spatial representation. It is superclass of feature and geometry.
" @en
- SpatialObject rdfs:label "SpatialObject" @en
- SpatialObject skos:definition "
The class spatial-object represents everything that can have
a spatial representation. It is superclass of feature and geometry.
" @en
- SpatialObject skos:prefLabel "SpatialObject" @en
- asGML dc:contributor "Matthew Perry"
- asGML dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- asGML dc:description "
The GML serialization of a geometry
" @en
- asGML rdfs:comment "
The GML serialization of a geometry
" @en
- asGML rdfs:label "asGML" @en
- asGML skos:definition "
The GML serialization of a geometry
" @en
- asGML skos:prefLabel "asGML" @en
- asWKT dc:contributor "Matthew Perry"
- asWKT dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- asWKT dc:description "
The WKT serialization of a geometry
" @en
- asWKT rdfs:comment "
The WKT serialization of a geometry
" @en
- asWKT rdfs:label "asWKT" @en
- asWKT skos:definition "
The WKT serialization of a geometry
" @en
- asWKT skos:prefLabel "asWKT" @en
- coordinateDimension dc:contributor "Matthew Perry"
- coordinateDimension dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- coordinateDimension dc:description "
The number of measurements or axes needed to describe the position of this
geometry in a coordinate system.
" @en
- coordinateDimension rdfs:comment "
The number of measurements or axes needed to describe the position of this
geometry in a coordinate system.
" @en
- coordinateDimension rdfs:label "coordinateDimension" @en
- coordinateDimension skos:definition "
The number of measurements or axes needed to describe the position of this
geometry in a coordinate system.
" @en
- coordinateDimension skos:prefLabel "coordinateDimension" @en
- defaultGeometry dc:contributor "Matthew Perry"
- defaultGeometry dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- defaultGeometry dc:description "
The default geometry to be used in spatial calculations.
It is Usually the most detailed geometry.
" @en
- defaultGeometry rdfs:comment "
The default geometry to be used in spatial calculations.
It is Usually the most detailed geometry.
" @en
- defaultGeometry rdfs:label "defaultGeometry" @en
- defaultGeometry skos:definition "
The default geometry to be used in spatial calculations.
It is Usually the most detailed geometry.
" @en
- defaultGeometry skos:prefLabel "defaultGeometry" @en
- dimension dc:contributor "Matthew Perry"
- dimension dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- dimension dc:description "
The topological dimension of this geometric object, which
must be less than or equal to the coordinate dimension.
In non-homogeneous collections, this will return the largest
topological dimension of the contained objects.
" @en
- dimension rdfs:comment "
The topological dimension of this geometric object, which
must be less than or equal to the coordinate dimension.
In non-homogeneous collections, this will return the largest
topological dimension of the contained objects.
" @en
- dimension rdfs:label "dimension" @en
- dimension skos:definition "
The topological dimension of this geometric object, which
must be less than or equal to the coordinate dimension.
In non-homogeneous collections, this will return the largest
topological dimension of the contained objects.
" @en
- dimension skos:prefLabel "dimension" @en
- ehContains dc:contributor "Matthew Perry"
- ehContains dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- ehContains dc:description "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: T*TFF*FF*
" @en
- ehContains rdfs:comment "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: T*TFF*FF*
" @en
- ehContains rdfs:label "contains" @en
- ehContains skos:definition "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: T*TFF*FF*
" @en
- ehContains skos:prefLabel "contains" @en
- ehCoveredBy dc:contributor "Matthew Perry"
- ehCoveredBy dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- ehCoveredBy dc:description "
Exists if the subject SpatialObject is spatially covered
by the object SpatialObject. DE-9IM: TFF*TFT**
" @en
- ehCoveredBy rdfs:comment "
Exists if the subject SpatialObject is spatially covered
by the object SpatialObject. DE-9IM: TFF*TFT**
" @en
- ehCoveredBy rdfs:label "coveredBy" @en
- ehCoveredBy skos:definition "
Exists if the subject SpatialObject is spatially covered
by the object SpatialObject. DE-9IM: TFF*TFT**
" @en
- ehCoveredBy skos:prefLabel "coveredBy" @en
- ehCovers dc:contributor "Matthew Perry"
- ehCovers dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- ehCovers dc:description "
Exists if the subject SpatialObject spatially covers the
object SpatialObject. DE-9IM: T*TFT*FF*
" @en
- ehCovers rdfs:comment "
Exists if the subject SpatialObject spatially covers the
object SpatialObject. DE-9IM: T*TFT*FF*
" @en
- ehCovers rdfs:label "covers" @en
- ehCovers skos:definition "
Exists if the subject SpatialObject spatially covers the
object SpatialObject. DE-9IM: T*TFT*FF*
" @en
- ehCovers skos:prefLabel "covers" @en
- ehDisjoint dc:contributor "Matthew Perry"
- ehDisjoint dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- ehDisjoint dc:description "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FF*FF****
" @en
- ehDisjoint rdfs:comment "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FF*FF****
" @en
- ehDisjoint rdfs:label "disjoint" @en
- ehDisjoint skos:definition "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FF*FF****
" @en
- ehDisjoint skos:prefLabel "disjoint" @en
- ehEquals dc:contributor "Matthew Perry"
- ehEquals dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- ehEquals dc:description "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- ehEquals rdfs:comment "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- ehEquals rdfs:label "equals" @en
- ehEquals skos:definition "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- ehEquals skos:prefLabel "equals" @en
- ehInside dc:contributor "Matthew Perry"
- ehInside dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- ehInside dc:description "
Exists if the subject SpatialObject is spatially inside
the object SpatialObject. DE-9IM: TFF*FFT**
" @en
- ehInside rdfs:comment "
Exists if the subject SpatialObject is spatially inside
the object SpatialObject. DE-9IM: TFF*FFT**
" @en
- ehInside rdfs:label "inside" @en
- ehInside skos:definition "
Exists if the subject SpatialObject is spatially inside
the object SpatialObject. DE-9IM: TFF*FFT**
" @en
- ehInside skos:prefLabel "inside" @en
- ehMeet dc:contributor "Matthew Perry"
- ehMeet dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- ehMeet dc:description "
Exists if the subject SpatialObject spatially meets the
object SpatialObject.
DE-9IM: FT******* ^ F**T***** ^ F***T****
" @en
- ehMeet rdfs:comment "
Exists if the subject SpatialObject spatially meets the
object SpatialObject.
DE-9IM: FT******* ^ F**T***** ^ F***T****
" @en
- ehMeet rdfs:label "meet" @en
- ehMeet skos:definition "
Exists if the subject SpatialObject spatially meets the
object SpatialObject.
DE-9IM: FT******* ^ F**T***** ^ F***T****
" @en
- ehMeet skos:prefLabel "meet" @en
- ehOverlap dc:contributor "Matthew Perry"
- ehOverlap dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- ehOverlap dc:description "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: T*T***T**
" @en
- ehOverlap rdfs:comment "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: T*T***T**
" @en
- ehOverlap rdfs:label "overlap" @en
- ehOverlap skos:definition "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: T*T***T**
" @en
- ehOverlap skos:prefLabel "overlap" @en
- gmlLiteral dc:contributor "Matthew Perry"
- gmlLiteral dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- gmlLiteral dc:description "
A GML serialization of a geometry object.
" @en
- gmlLiteral rdfs:comment "
A GML serialization of a geometry object.
" @en
- gmlLiteral rdfs:label "GML Literal" @en
- gmlLiteral skos:definition "
A GML serialization of a geometry object.
" @en
- gmlLiteral skos:prefLabel "GML Literal" @en
- hasGeometry dc:contributor "Matthew Perry"
- hasGeometry dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- hasGeometry dc:description "
A spatial representation for a given feature.
" @en
- hasGeometry rdfs:comment "
A spatial representation for a given feature.
" @en
- hasGeometry rdfs:label "hasGeometry" @en
- hasGeometry skos:definition "
A spatial representation for a given feature.
" @en
- hasGeometry skos:prefLabel "hasGeometry" @en
- hasSerialization dc:contributor "Matthew Perry"
- hasSerialization dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- hasSerialization dc:description "
Connects a geometry object with its text-based serialization.
" @en
- hasSerialization rdfs:comment "
Connects a geometry object with its text-based serialization.
" @en
- hasSerialization rdfs:label "has serialization" @en
- hasSerialization skos:definition "
Connects a geometry object with its text-based serialization.
" @en
- hasSerialization skos:prefLabel "has serialization" @en
- isEmpty dc:contributor "Matthew Perry"
- isEmpty dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- isEmpty dc:description "
(true) if this geometric object is the empty Geometry. If
true, then this geometric object represents the empty point
set for the coordinate space.
" @en
- isEmpty rdfs:comment "
(true) if this geometric object is the empty Geometry. If
true, then this geometric object represents the empty point
set for the coordinate space.
" @en
- isEmpty rdfs:label "isEmpty" @en
- isEmpty skos:definition "
(true) if this geometric object is the empty Geometry. If
true, then this geometric object represents the empty point
set for the coordinate space.
" @en
- isEmpty skos:prefLabel "isEmpty" @en
- isSimple dc:contributor "Matthew Perry"
- isSimple dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- isSimple dc:description "
(true) if this geometric object has no anomalous geometric
points, such as self intersection or self tangency.
" @en
- isSimple rdfs:comment "
(true) if this geometric object has no anomalous geometric
points, such as self intersection or self tangency.
" @en
- isSimple rdfs:label "isSimple" @en
- isSimple skos:definition "
(true) if this geometric object has no anomalous geometric
points, such as self intersection or self tangency.
" @en
- isSimple skos:prefLabel "isSimple" @en
- rcc8dc dc:contributor "Matthew Perry"
- rcc8dc dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- rcc8dc dc:description "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FFTFFTTTT
" @en
- rcc8dc rdfs:comment "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FFTFFTTTT
" @en
- rcc8dc rdfs:label "disconnected" @en
- rcc8dc skos:definition "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FFTFFTTTT
" @en
- rcc8dc skos:prefLabel "disconnected" @en
- rcc8ec dc:contributor "Matthew Perry"
- rcc8ec dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- rcc8ec dc:description "
Exists if the subject SpatialObject spatially meets the
object SpatialObject. DE-9IM: FFTFTTTTT
" @en
- rcc8ec rdfs:comment "
Exists if the subject SpatialObject spatially meets the
object SpatialObject. DE-9IM: FFTFTTTTT
" @en
- rcc8ec rdfs:label "externally connected" @en
- rcc8ec skos:definition "
Exists if the subject SpatialObject spatially meets the
object SpatialObject. DE-9IM: FFTFTTTTT
" @en
- rcc8ec skos:prefLabel "externally connected" @en
- rcc8eq dc:contributor "Matthew Perry"
- rcc8eq dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- rcc8eq dc:description "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- rcc8eq rdfs:comment "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- rcc8eq rdfs:label "equals" @en
- rcc8eq skos:definition "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- rcc8eq skos:prefLabel "equals" @en
- rcc8ntpp dc:contributor "Matthew Perry"
- rcc8ntpp dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- rcc8ntpp dc:description "
Exists if the subject SpatialObject is spatially inside
the object SpatialObject. DE-9IM: TFFTFFTTT
" @en
- rcc8ntpp rdfs:comment "
Exists if the subject SpatialObject is spatially inside
the object SpatialObject. DE-9IM: TFFTFFTTT
" @en
- rcc8ntpp rdfs:label "non-tangential proper part" @en
- rcc8ntpp skos:definition "
Exists if the subject SpatialObject is spatially inside
the object SpatialObject. DE-9IM: TFFTFFTTT
" @en
- rcc8ntpp skos:prefLabel "non-tangential proper part" @en
- rcc8ntppi dc:contributor "Matthew Perry"
- rcc8ntppi dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- rcc8ntppi dc:description "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: TTTFFTFFT
" @en
- rcc8ntppi rdfs:comment "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: TTTFFTFFT
" @en
- rcc8ntppi rdfs:label "non-tangential proper part inverse" @en
- rcc8ntppi skos:definition "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: TTTFFTFFT
" @en
- rcc8ntppi skos:prefLabel "non-tangential proper part inverse" @en
- rcc8po dc:contributor "Matthew Perry"
- rcc8po dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- rcc8po dc:description "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: TTTTTTTTT
" @en
- rcc8po rdfs:comment "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: TTTTTTTTT
" @en
- rcc8po rdfs:label "partially overlapping" @en
- rcc8po skos:definition "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: TTTTTTTTT
" @en
- rcc8po skos:prefLabel "partially overlapping" @en
- rcc8tpp dc:contributor "Matthew Perry"
- rcc8tpp dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- rcc8tpp dc:description "
Exists if the subject SpatialObject is spatially covered
by the object SpatialObject. DE-9IM: TFFTTFTTT
" @en
- rcc8tpp rdfs:comment "
Exists if the subject SpatialObject is spatially covered
by the object SpatialObject. DE-9IM: TFFTTFTTT
" @en
- rcc8tpp rdfs:label "tangential proper part" @en
- rcc8tpp skos:definition "
Exists if the subject SpatialObject is spatially covered
by the object SpatialObject. DE-9IM: TFFTTFTTT
" @en
- rcc8tpp skos:prefLabel "tangential proper part" @en
- rcc8tppi dc:contributor "Matthew Perry"
- rcc8tppi dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- rcc8tppi dc:description "
Exists if the subject SpatialObject spatially covers the
object SpatialObject. DE-9IM: TTTFTTFFT
" @en
- rcc8tppi rdfs:comment "
Exists if the subject SpatialObject spatially covers the
object SpatialObject. DE-9IM: TTTFTTFFT
" @en
- rcc8tppi rdfs:label "tangential proper part inverse" @en
- rcc8tppi skos:definition "
Exists if the subject SpatialObject spatially covers the
object SpatialObject. DE-9IM: TTTFTTFFT
" @en
- rcc8tppi skos:prefLabel "tangential proper part inverse" @en
- sfContains dc:contributor "Matthew Perry"
- sfContains dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- sfContains dc:description "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: T*****FF*
" @en
- sfContains rdfs:comment "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: T*****FF*
" @en
- sfContains rdfs:label "contains" @en
- sfContains skos:definition "
Exists if the subject SpatialObject spatially contains the
object SpatialObject. DE-9IM: T*****FF*
" @en
- sfContains skos:prefLabel "contains" @en
- sfCrosses dc:contributor "Matthew Perry"
- sfCrosses dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- sfCrosses dc:description "
Exists if the subject SpatialObject spatially crosses the
object SpatialObject. DE-9IM: T*T******
" @en
- sfCrosses rdfs:comment "
Exists if the subject SpatialObject spatially crosses the
object SpatialObject. DE-9IM: T*T******
" @en
- sfCrosses rdfs:label "crosses" @en
- sfCrosses skos:definition "
Exists if the subject SpatialObject spatially crosses the
object SpatialObject. DE-9IM: T*T******
" @en
- sfCrosses skos:prefLabel "crosses" @en
- sfDisjoint dc:contributor "Matthew Perry"
- sfDisjoint dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- sfDisjoint dc:description "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FF*FF****
" @en
- sfDisjoint rdfs:comment "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FF*FF****
" @en
- sfDisjoint rdfs:label "disjoint" @en
- sfDisjoint skos:definition "
Exists if the subject SpatialObject is spatially disjoint
from the object SpatialObject. DE-9IM: FF*FF****
" @en
- sfDisjoint skos:prefLabel "disjoint" @en
- sfEquals dc:contributor "Matthew Perry"
- sfEquals dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- sfEquals dc:description "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- sfEquals rdfs:comment "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- sfEquals rdfs:label "equals" @en
- sfEquals skos:definition "
Exists if the subject SpatialObject spatially equals the
object SpatialObject. DE-9IM: TFFFTFFFT
" @en
- sfEquals skos:prefLabel "equals" @en
- sfIntersects dc:contributor "Matthew Perry"
- sfIntersects dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- sfIntersects dc:description "
Exists if the subject SpatialObject is not spatially disjoint
from the object SpatialObject.
DE-9IM: T******** ^ *T******* ^ ***T***** ^ ****T****
" @en
- sfIntersects rdfs:comment "
Exists if the subject SpatialObject is not spatially disjoint
from the object SpatialObject.
DE-9IM: T******** ^ *T******* ^ ***T***** ^ ****T****
" @en
- sfIntersects rdfs:label "intersects" @en
- sfIntersects skos:definition "
Exists if the subject SpatialObject is not spatially disjoint
from the object SpatialObject.
DE-9IM: T******** ^ *T******* ^ ***T***** ^ ****T****
" @en
- sfIntersects skos:prefLabel "intersects" @en
- sfOverlaps dc:contributor "Matthew Perry"
- sfOverlaps dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- sfOverlaps dc:description "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: T*T***T**
" @en
- sfOverlaps rdfs:comment "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: T*T***T**
" @en
- sfOverlaps rdfs:label "overlaps" @en
- sfOverlaps skos:definition "
Exists if the subject SpatialObject spatially overlaps the
object SpatialObject. DE-9IM: T*T***T**
" @en
- sfOverlaps skos:prefLabel "overlaps" @en
- sfTouches dc:contributor "Matthew Perry"
- sfTouches dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- sfTouches dc:description "
Exists if the subject SpatialObject spatially touches the
object SpatialObject.
DE-9IM: FT******* ^ F**T***** ^ F***T****
" @en
- sfTouches rdfs:comment "
Exists if the subject SpatialObject spatially touches the
object SpatialObject.
DE-9IM: FT******* ^ F**T***** ^ F***T****
" @en
- sfTouches rdfs:label "touches" @en
- sfTouches skos:definition "
Exists if the subject SpatialObject spatially touches the
object SpatialObject.
DE-9IM: FT******* ^ F**T***** ^ F***T****
" @en
- sfTouches skos:prefLabel "touches" @en
- sfWithin dc:contributor "Matthew Perry"
- sfWithin dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- sfWithin dc:description "
Exists if the subject SpatialObject is spatially within the
object SpatialObject. DE-9IM: T*F**F***
" @en
- sfWithin rdfs:comment "
Exists if the subject SpatialObject is spatially within the
object SpatialObject. DE-9IM: T*F**F***
" @en
- sfWithin rdfs:label "within" @en
- sfWithin skos:definition "
Exists if the subject SpatialObject is spatially within the
object SpatialObject. DE-9IM: T*F**F***
" @en
- sfWithin skos:prefLabel "within" @en
- spatialDimension dc:contributor "Matthew Perry"
- spatialDimension dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- spatialDimension dc:description "
The number of measurements or axes needed to describe the spatial position of
this geometry in a coordinate system.
" @en
- spatialDimension rdfs:comment "
The number of measurements or axes needed to describe the spatial position of
this geometry in a coordinate system.
" @en
- spatialDimension rdfs:label "spatialDimension" @en
- spatialDimension skos:definition "
The number of measurements or axes needed to describe the spatial position of
this geometry in a coordinate system.
" @en
- spatialDimension skos:prefLabel "spatialDimension" @en
- wktLiteral dc:contributor "Matthew Perry"
- wktLiteral dc:creator "OGC GeoSPARQL 1.0 Standard Working Group"
- wktLiteral dc:description "
A Well-known Text serialization of a geometry object.
" @en
- wktLiteral rdfs:comment "
A Well-known Text serialization of a geometry object.
" @en
- wktLiteral rdfs:label "Well-known Text Literal" @en
- wktLiteral skos:definition "
A Well-known Text serialization of a geometry object.
" @en
- wktLiteral skos:prefLabel "Well-known Text Literal" @en
- AbstractCurveSegment rdfs:label "Abstract Curve Segment" @en
- AbstractGeometricPrimitive rdfs:label "Abstract Geometric Primitive" @en
- AbstractGeometry rdfs:label "Abstract Geometry" @en
- AbstractGriddedSurface rdfs:label "Abstract Gridded Surface" @en
- AbstractParametricCurveSurface rdfs:label "Abstract Parametric Curve Surface" @en
- AbstractSurfacePatch rdfs:label "Abstract Surface Patch" @en
- Arc rdfs:label "Arc" @en
- ArcByBulge rdfs:label "Arc by Bulge" @en
- ArcByCenterPoint rdfs:label "Arc by Center Point" @en
- ArcString rdfs:label "Arc String" @en
- ArcStringByBulge rdfs:label "Arc String by Bulge" @en
- BSpline rdfs:label "BSpline" @en
- Bezier rdfs:label "Bezier" @en
- Circle rdfs:label "Circle" @en
- CircleByCenterPoint rdfs:label "CircleByCenterPoint" @en
- Clothoid rdfs:label "Clothoid" @en
- Composite rdfs:label "Composite" @en
- CompositeCurve rdfs:label "Composite Curve" @en
- CompositeSolid rdfs:label "Composite Solid" @en
- CompositeSurface rdfs:label "Composite Surface" @en
- Cone rdfs:label "Cone" @en
- CubicSpline rdfs:label "Cubic Spline" @en
- Curve rdfs:label "Curve" @en
- Cylinder rdfs:label "Cylinder" @en
- Geodesic rdfs:label "Geodesic" @en
- GeodesicString rdfs:label "Geodesic String" @en
- GeometricComplex rdfs:label "Geometric Complex" @en
- LineString rdfs:label "Line String" @en
- LineStringSegment rdfs:label "Line String Segment" @en
- LinearRing rdfs:label "Linear Ring" @en
- MultiCurve rdfs:label "Multi-Curve" @en
- MultiGeometry rdfs:label "Multi-Geometry" @en
- MultiPoint rdfs:label "Multi-Point" @en
- MultiSolid rdfs:label "Multi-Solid" @en
- MultiSurface rdfs:label "Multi-Surface" @en
- OffsetCurve rdfs:label "Offset Curve" @en
- OrientableCurve rdfs:label "Orientable Curve" @en
- OrientableSurface rdfs:label "Orientable Surface" @en
- Point rdfs:label "Point" @en
- Polygon rdfs:label "Polygon" @en
- PolygonPatch rdfs:label "Polygon Patch" @en
- PolyhedralSurface rdfs:label "Polyhedral Surface" @en
- PolynomialSpline rdfs:label "Polynomial Spline" @en
- Rectangle rdfs:label "Rectangle" @en
- Ring rdfs:label "Ring" @en
- Shell rdfs:label "Shell" @en
- Solid rdfs:label "Solid" @en
- Sphere rdfs:label "Sphere" @en
- SplineCurve rdfs:label "Spline Curve" @en
- Surface rdfs:label "Surface" @en
- Tin rdfs:label "Triangulated Irregular Network" @en
- Triangle rdfs:label "Triangle" @en
- TriangulatedSurface rdfs:label "Triangulated Surface" @en
- Curve rdfs:comment "
A Curve is a 1-dimensional geometric object usually stored as a sequence of Points, with the subtype of Curve specifying the form of the interpolation between Points. This specification defines only one subclass of Curve, LineString, which uses linear interpolation between Points.
A Curve is a 1-dimensional geometric object that is the homeomorphic image of a real, closed, interval.
A Curve is simple if it does not pass through the same Point twice with the possible exception of the two end
points.
A Curve is closed if its start Point is equal to its end Point.
The boundary of a closed Curve is empty.
A Curve that is simple and closed is a Ring.
The boundary of a non-closed Curve consists of its two end Points.
A Curve is defined as topologically closed, that is, it contains its endpoints f(a) and f(b).
" @en
- Curve rdfs:label "Curve" @en
- Geometry rdfs:comment "
Geometry is the root class of the hierarchy.
The instantiable subclasses of Geometry are restricted to 0, 1 and 2-dimensional geometric objects that exist in 2, 3 or 4-dimensional coordinate space (R2, R3 or R4). Geometry values in R2 have points with coordinate values for x and y. Geometry values in R3 have points with coordinate values for x, y and z or for x, y and m. Geometry values in R4 have points with coordinate values for x, y, z and m.
The interpretation of the coordinates is subject to the coordinate reference systems associated to the point. All coordinates within a geometry object should be in the same coordinate reference systems. Each coordinate shall be unambiguously associated to a coordinate reference system either directly or through its containing geometry. The z coordinate of a point is typically, but not necessarily, represents altitude or elevation. The m coordinate represents a measurement.
All Geometry classes described in this specification are defined so that instances of Geometry are topologically closed, i.e. all represented geometries include their boundary as point sets. This does not affect their representation, and open version of the same classes may be used in other circumstances, such as topological representations.
" @en
- Geometry rdfs:label "Geometry" @en
- GeometryCollection rdfs:comment "
A GeometryCollection is a geometric object that is a collection of some number of geometric objects.
All the elements in a GeometryCollection shall be in the same Spatial Reference System. This is also the Spatial Reference System for the GeometryCollection.
GeometryCollection places no other constraints on its elements. Subclasses of GeometryCollection may restrict membership based on dimension and may also place other constraints on the degree of spatial overlap between elements.
" @en
- GeometryCollection rdfs:label "Geometry Collection" @en
- Line rdfs:comment "
A Line is a LineString with exactly 2 Points.
" @en
- Line rdfs:label "Line" @en
- LineString rdfs:comment "
A LineString is a Curve with linear interpolation between Points. Each consecutive pair of Points defines a Line segment.
" @en
- LineString rdfs:label "Line String" @en
- LinearRing rdfs:comment "
A LinearRing is a LineString that is both closed and simple.
" @en
- LinearRing rdfs:label "Linear Ring" @en
- MultiCurve rdfs:comment "
A MultiCurve is a 1-dimensional GeometryCollection whose elements are Curves.
A MultiCurve defines a set of methods for its subclasses and is included for reasons of extensibility.
A MultiCurve is simple if and only if all of its elements are simple and the only intersections between any two elements occur at Points that are on the boundaries of both elements.
The boundary of a MultiCurve is obtained by applying the mod 2 union rule: A Point is in the boundary of a MultiCurve if it is in the boundaries of an odd number of elements of the MultiCurve.
A MultiCurve is closed if all of its elements are closed. The boundary of a closed MultiCurve is always empty.
A MultiCurve is defined as topologically closed.
" @en
- MultiCurve rdfs:label "Multi Curve" @en
- MultiLineString rdfs:comment "
A MultiLineString is a MultiCurve whose elements are LineStrings.
" @en
- MultiLineString rdfs:label "Multi Line String" @en
- MultiPoint rdfs:comment "
A MultiPoint is a 0-dimensional GeometryCollection. The elements of a MultiPoint are restricted to Points. ThePoints are not connected or ordered in any semantically important way.
A MultiPoint is simple if no two Points in the MultiPoint are equal (have identical coordinate values in X and Y).
Every MultiPoint is spatially equal to a simple Multipoint.
The boundary of a MultiPoint is the empty set.
" @en
- MultiPoint rdfs:label "Multi Point" @en
- MultiPolygon rdfs:comment "
A MultiPolygon is a MultiSurface whose elements are Polygons.
The assertions for MultiPolygons are as follows.
a) The interiors of 2 Polygons that are elements of a MultiPolygon may not intersect.
b) The boundaries of any 2 Polygons that are elements of a MultiPolygon may not cross and may touch at only a finite number of Points.
c) A MultiPolygon is defined as topologically closed.
d) A MultiPolygon may not have cut lines, spikes or punctures, a MultiPolygon is a regular closed Point set,
e) The interior of a MultiPolygon with more than 1 Polygon is not connected; the number of connected components of the interior of a MultiPolygon is equal to the number of Polygons in the MultiPolygon.
The boundary of a MultiPolygon is a set of closed Curves (LineStrings) corresponding to the boundaries of its element Polygons. Each Curve in the boundary of the MultiPolygon is in the boundary of exactly 1 element Polygon, and every Curve in the boundary of an element Polygon is in the boundary of the MultiPolygon.
" @en
- MultiPolygon rdfs:label "Multi Polygon" @en
- MultiSurface rdfs:comment "
A MultiSurface is a 2-dimensional GeometryCollection whose elements are Surfaces, all using coordinates from the same coordinate reference system. The geometric interiors of any two Surfaces in a MultiSurface may not intersect in the full coordinate system. The boundaries of any two coplanar elements in a MultiSurface may intersect, at most, at a finite number of Points. If they were to meet along a curve, they could be merged into a single surface.
A MultiSurface may be used to represent heterogeneous surfaces collections of polygons and polyhedral surfaces. It defines a set of methods for its subclasses. The subclass of MultiSurface is MultiPolygon corresponding to a collection of Polygons only. Other collections shall use MultiSurface.
" @en
- MultiSurface rdfs:label "Multi Surface" @en
- Point rdfs:comment "
A Point is a 0-dimensional geometric object and represents a single location in coordinate space.
A Point has an x-coordinate value, a y-coordinate value. If called for by the associated Spatial Reference System, it may also have coordinate values for z and m.
The boundary of a Point is the empty set.
" @en
- Point rdfs:label "Point" @en
- Polygon rdfs:comment "
A Polygon is a planar Surface defined by 1 exterior boundary and 0 or more interior boundaries. Each interior boundary defines a hole in the Polygon.
The exterior boundary LinearRing defines the top of the surface which is the side of the surface from which the exterior boundary appears to traverse the boundary in a counter clockwise direction. The interior LinearRings will have the opposite orientation, and appear as clockwise when viewed from the top,
The assertions for Polygons (the rules that define valid Polygons) are as follows:
a) Polygons are topologically closed;
b) The boundary of a Polygon consists of a set of LinearRings that make up its exterior and interior boundaries;
c) No two Rings in the boundary cross and the Rings in the boundary of a Polygon may intersect at a Point but only as a tangent.
d) A Polygon may not have cut lines, spikes or punctures.
e) The interior of every Polygon is a connected point set;
f) The exterior of a Polygon with 1 or more holes is not connected. Each hole defines a connected component of the exterior.
" @en
- Polygon rdfs:label "Polygon" @en
- PolyhedralSurface rdfs:comment "
A PolyhedralSurface is a contiguous collection of polygons, which share common boundary segments. For each pair of polygons that touch, the common boundary shall be expressible as a finite collection of LineStrings. Each such LineString shall be part of the boundary of at most 2 Polygon patches.
For any two polygons that share a common boundary, the top of the polygon shall be consistent. This means that when two LinearRings from these two Polygons traverse the common boundary segment, they do so in opposite directions. Since the Polyhedral surface is contiguous, all polygons will be thus consistently oriented. This means that a non-oriented surface (such as Mbius band) shall not have single surface representations. They may be represented by a MultiSurface.
If each such LineString is the boundary of exactly 2 Polygon patches, then the PolyhedralSurface is a simple, closed polyhedron and is topologically isomorphic to the surface of a sphere. By the Jordan Surface Theorem (Jordans Theorem for 2-spheres), such polyhedrons enclose a solid topologically isomorphic to the interior of a sphere; the ball. In this case, the top of the surface will either point inward or outward of the enclosed finite solid. If outward, the surface is the exterior boundary of the enclosed surface. If inward, the surface is the interior of the infinite complement of the enclosed solid. A Ball with some number of voids (holes) inside can thus be presented as one exterior boundary shell, and some number in interior boundary shells.
" @en
- PolyhedralSurface rdfs:label "Polyhedral Surface" @en
- Surface rdfs:comment "
A Surface is a 2-dimensional geometric object.
A simple Surface may consists of a single patch that is associated with one exterior boundary and 0 or more interior boundaries. A single such Surface patch in 3-dimensional space is isometric to planar Surfaces, by a simple affine rotation matrix that rotates the patch onto the plane z = 0. If the patch is not vertical, the projection onto the same plane is an isomorphism, and can be represented as a linear transformation, i.e. an affine.
Polyhedral Surfaces are formed by stitching together such simple Surfaces patches along their common boundaries. Such polyhedral Surfaces in a 3-dimensional space may not be planar as a whole, depending on the orientation of their planar normals. If all the patches are in alignment (their normals are parallel), then the whole stitched polyhedral surface is co-planar and can be represented as a single patch if it is connected.
The boundary of a simple Surface is the set of closed Curves corresponding to its exterior and interior boundaries.
A Polygon is a simple Surface that is planar. A PolyhedralSurface is a simple surface, consisting of some number of Polygon patches or facets. If a PolyhedralSurface is closed, then it bounds a solid. A MultiSurface containing a set of closed PolyhedralSurfaces can be used to represent a Solid object with holes.
" @en
- Surface rdfs:label "Surface" @en
- TIN rdfs:comment "
A TIN (triangulated irregular network) is a PolyhedralSurface consisting only of Triangle patches.
" @en
- TIN rdfs:label "Triangulated Irregular Network" @en
- Triangle rdfs:comment "
A Triangle is a polygon with 3 distinct, non-collinear vertices and no interior boundary.
" @en
- Triangle rdfs:label "Triangle" @en
- skos:Collection rdfs:label "Collection" @en
- skos:Collection skos:definition "A meaningful collection of concepts." @en
- skos:Collection skos:scopeNote "Labelled collections can be used where you would like a set of concepts to be displayed under a 'node label' in the hierarchy." @en
- skos:Concept rdfs:label "Concept" @en
- skos:Concept skos:definition "An idea or notion; a unit of thought." @en
- skos:ConceptScheme rdfs:label "Concept Scheme" @en
- skos:ConceptScheme skos:definition "A set of concepts, optionally including statements about semantic relationships between those concepts." @en
- skos:ConceptScheme skos:example "Thesauri, classification schemes, subject heading lists, taxonomies, 'folksonomies', and other types of controlled vocabulary are all examples of concept schemes. Concept schemes are also embedded in glossaries and terminologies." @en
- skos:ConceptScheme skos:scopeNote "A concept scheme may be defined to include concepts from different sources." @en
- skos:OrderedCollection rdfs:label "Ordered Collection" @en
- skos:OrderedCollection skos:definition "An ordered collection of concepts, where both the grouping and the ordering are meaningful." @en
- skos:OrderedCollection skos:scopeNote "Ordered collections can be used where you would like a set of concepts to be displayed in a specific order, and optionally under a 'node label'." @en
- skos:altLabel rdfs:comment "The range of skos:altLabel is the class of RDF plain literals." @en
- skos:altLabel rdfs:comment "skos:prefLabel, skos:altLabel and skos:hiddenLabel are pairwise disjoint properties." @en
- skos:altLabel rdfs:label "alternative label" @en
- skos:altLabel skos:definition "An alternative lexical label for a resource." @en
- skos:altLabel skos:example "Acronyms, abbreviations, spelling variants, and irregular plural/singular forms may be included among the alternative labels for a concept. Mis-spelled terms are normally included as hidden labels (see skos:hiddenLabel)." @en
- skos:broadMatch rdfs:label "has broader match" @en
- skos:broadMatch skos:definition "skos:broadMatch is used to state a hierarchical mapping link between two conceptual resources in different concept schemes." @en
- skos:broader rdfs:comment "Broader concepts are typically rendered as parents in a concept hierarchy (tree)." @en
- skos:broader rdfs:label "has broader" @en
- skos:broader skos:definition "Relates a concept to a concept that is more general in meaning." @en
- skos:broader skos:scopeNote "By convention, skos:broader is only used to assert an immediate (i.e. direct) hierarchical link between two conceptual resources." @en
- skos:broaderTransitive rdfs:label "has broader transitive" @en
- skos:broaderTransitive skos:definition "skos:broaderTransitive is a transitive superproperty of skos:broader."
- skos:broaderTransitive skos:scopeNote "By convention, skos:broaderTransitive is not used to make assertions. Rather, the properties can be used to draw inferences about the transitive closure of the hierarchical relation, which is useful e.g. when implementing a simple query expansion algorithm in a search application." @en
- skos:changeNote rdfs:label "change note" @en
- skos:changeNote skos:definition "A note about a modification to a concept." @en
- skos:closeMatch rdfs:label "has close match" @en
- skos:closeMatch skos:definition "skos:closeMatch is used to link two concepts that are sufficiently similar that they can be used interchangeably in some information retrieval applications. In order to avoid the possibility of "compound errors" when combining mappings across more than two concept schemes, skos:closeMatch is not declared to be a transitive property." @en
- skos:definition rdfs:label "definition" @en
- skos:definition skos:definition "A statement or formal explanation of the meaning of a concept." @en
- skos:editorialNote rdfs:label "editorial note" @en
- skos:editorialNote skos:definition "A note for an editor, translator or maintainer of the vocabulary." @en
- skos:exactMatch rdfs:comment "skos:exactMatch is disjoint with each of the properties skos:broadMatch and skos:relatedMatch." @en
- skos:exactMatch rdfs:label "has exact match" @en
- skos:exactMatch skos:definition "skos:exactMatch is used to link two concepts, indicating a high degree of confidence that the concepts can be used interchangeably across a wide range of information retrieval applications. skos:exactMatch is a transitive property, and is a sub-property of skos:closeMatch." @en
- skos:example rdfs:label "example" @en
- skos:example skos:definition "An example of the use of a concept." @en
- skos:hasTopConcept rdfs:label "has top concept" @en
- skos:hasTopConcept skos:definition "Relates, by convention, a concept scheme to a concept which is topmost in the broader/narrower concept hierarchies for that scheme, providing an entry point to these hierarchies." @en
- skos:hiddenLabel rdfs:comment "The range of skos:hiddenLabel is the class of RDF plain literals." @en
- skos:hiddenLabel rdfs:comment "skos:prefLabel, skos:altLabel and skos:hiddenLabel are pairwise disjoint properties." @en
- skos:hiddenLabel rdfs:label "hidden label" @en
- skos:hiddenLabel skos:definition "A lexical label for a resource that should be hidden when generating visual displays of the resource, but should still be accessible to free text search operations." @en
- skos:historyNote rdfs:label "history note" @en
- skos:historyNote skos:definition "A note about the past state/use/meaning of a concept." @en
- skos:inScheme rdfs:label "is in scheme" @en
- skos:inScheme skos:definition "Relates a resource (for example a concept) to a concept scheme in which it is included." @en
- skos:inScheme skos:scopeNote "A concept may be a member of more than one concept scheme." @en
- skos:mappingRelation rdfs:comment "These concept mapping relations mirror semantic relations, and the data model defined below is similar (with the exception of skos:exactMatch) to the data model defined for semantic relations. A distinct vocabulary is provided for concept mapping relations, to provide a convenient way to differentiate links within a concept scheme from links between concept schemes. However, this pattern of usage is not a formal requirement of the SKOS data model, and relies on informal definitions of best practice." @en
- skos:mappingRelation rdfs:label "is in mapping relation with" @en
- skos:mappingRelation skos:definition "Relates two concepts coming, by convention, from different schemes, and that have comparable meanings" @en
- skos:member rdfs:label "has member" @en
- skos:member skos:definition "Relates a collection to one of its members." @en
- skos:memberList rdfs:comment "For any resource, every item in the list given as the value of the
skos:memberList property is also a value of the skos:member property." @en
- skos:memberList rdfs:label "has member list" @en
- skos:memberList skos:definition "Relates an ordered collection to the RDF list containing its members." @en
- skos:narrowMatch rdfs:label "has narrower match" @en
- skos:narrowMatch skos:definition "skos:narrowMatch is used to state a hierarchical mapping link between two conceptual resources in different concept schemes." @en
- skos:narrower rdfs:comment "Narrower concepts are typically rendered as children in a concept hierarchy (tree)." @en
- skos:narrower rdfs:label "has narrower" @en
- skos:narrower skos:definition "Relates a concept to a concept that is more specific in meaning." @en
- skos:narrower skos:scopeNote "By convention, skos:broader is only used to assert an immediate (i.e. direct) hierarchical link between two conceptual resources." @en
- skos:narrowerTransitive rdfs:label "has narrower transitive" @en
- skos:narrowerTransitive skos:definition "skos:narrowerTransitive is a transitive superproperty of skos:narrower."
- skos:narrowerTransitive skos:scopeNote "By convention, skos:narrowerTransitive is not used to make assertions. Rather, the properties can be used to draw inferences about the transitive closure of the hierarchical relation, which is useful e.g. when implementing a simple query expansion algorithm in a search application." @en
- skos:notation rdfs:label "notation" @en
- skos:notation skos:definition "A notation, also known as classification code, is a string of characters such as "T58.5" or "303.4833" used to uniquely identify a concept within the scope of a given concept scheme." @en
- skos:notation skos:scopeNote "By convention, skos:notation is used with a typed literal in the object position of the triple." @en
- skos:note rdfs:label "note" @en
- skos:note skos:definition "A general note, for any purpose." @en
- skos:note skos:scopeNote "This property may be used directly, or as a super-property for more specific note types." @en
- skos:prefLabel rdfs:comment "A resource has no more than one value of skos:prefLabel per language tag, and no more than one value of skos:prefLabel without language tag." @en
- skos:prefLabel rdfs:comment "The range of skos:prefLabel is the class of RDF plain literals." @en
- skos:prefLabel rdfs:comment "skos:prefLabel, skos:altLabel and skos:hiddenLabel are pairwise
disjoint properties." @en
- skos:prefLabel rdfs:label "preferred label" @en
- skos:prefLabel skos:definition "The preferred lexical label for a resource, in a given language." @en
- skos:related rdfs:comment "skos:related is disjoint with skos:broaderTransitive" @en
- skos:related rdfs:label "has related" @en
- skos:related skos:definition "Relates a concept to a concept with which there is an associative semantic relationship." @en
- skos:relatedMatch rdfs:label "has related match" @en
- skos:relatedMatch skos:definition "skos:relatedMatch is used to state an associative mapping link between two conceptual resources in different concept schemes." @en
- skos:scopeNote rdfs:label "scope note" @en
- skos:scopeNote skos:definition "A note that helps to clarify the meaning and/or the use of a concept." @en
- skos:semanticRelation rdfs:label "is in semantic relation with" @en
- skos:semanticRelation skos:definition "Links a concept to a concept related by meaning." @en
- skos:semanticRelation skos:scopeNote "This property should not be used directly, but as a super-property for all properties denoting a relationship of meaning between concepts." @en
- skos:topConceptOf rdfs:label "is top concept in scheme" @en
- skos:topConceptOf skos:definition "Relates a concept to the concept scheme that it is a top level concept of." @en
- ActuatingFunction rdfs:comment "A function that allows to transmit data to actuators, such as level settings (e.g., temperature) or binary switching (e.g., open/close, on/off)" @en
- ActuatingFunction rdfs:label "Actuating function" @en
- Actuator rdfs:comment "A device responsible for moving or controlling a mechanism or system by performing an actuating function" @en
- Actuator rdfs:label "Actuator" @en
- Appliance rdfs:comment "An electrical/mechanical machine that accomplish some household functions, such as cleaning or cooking" @en
- Appliance rdfs:label "Appliance" @en
- Cleaning rdfs:comment "A type of task for which a device is designed" @en
- Cleaning rdfs:label "Cleaning" @en
- CloseCommand rdfs:comment "A type of command" @en
- CloseCommand rdfs:label "Close command" @en
- CloseState rdfs:comment "The state of a device that is CLOSE" @en
- CloseState rdfs:label "Close state" @en
- Coal rdfs:comment "A type of commodity" @en
- Coal rdfs:label "Coal" @en
- Comfort rdfs:comment "A type of task for which a device is designed" @en
- Comfort rdfs:label "Comfort" @en
- Command rdfs:comment "A directive that a device must support to perform a certain function. A command may act upon a state, but does not necessarily act upon a state. For example, the ON command acts upon the ON/OFF state, but the GET command does not act upon any state, it simply gives a directive to retrieve a certain value. We propose here a list of commands that are relevant for the purpose of SAREF, but this list can be extended." @en
- Command rdfs:label "Command" @en
- Commodity rdfs:comment "A marketable item for which there is demand, but which is supplied without qualitative differentiation across a market. SAREF refers to energy commodities such as electricity, gas, coal and oil. " @en
- Commodity rdfs:label "Commodity" @en
- Currency rdfs:comment "The class of units of measure for price" @en
- Currency rdfs:label "Currency" @en
- Device rdfs:comment "A tangible object designed to accomplish a particular task. In order to accomplish this task, the device performs one or more functions. For example, a washing machine is designed to wash (task) and to accomplish this task it performs a start and stop function." @en
- Device rdfs:label "Device" @en
- DoorSwitch rdfs:comment "A switch that performs the saref:OpenCloseFunction, is used for controlling a door, and can be found in the state saref:OpenCloseState. A saref:DoorSwitch is typically used to accomplish saref:Safety." @en
- DoorSwitch rdfs:label "Door switch" @en
- Drying rdfs:comment "A type of task for which a device is designed" @en
- Drying rdfs:label "Drying" @en
- Electricity rdfs:comment "A type of commodity" @en
- Electricity rdfs:label "Electricity" @en
- Energy rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value measured in an energy unit (such as Kilowatt_Hour or Watt_hour). Furter specializations of the saref:Energy class can be found in the SAREF4ENER extension, where classes such as EnergyMax, EnergyMin and EnergyExpected are defined. " @en
- Energy rdfs:label "Energy" @en
- EnergyEfficiency rdfs:comment "A type of task for which a device is designed" @en
- EnergyEfficiency rdfs:label "EnergyEfficiency" @en
- EnergyUnit rdfs:comment "The unit of measure for energy" @en
- EnergyUnit rdfs:label "Energy unit" @en
- Entertainment rdfs:comment "A type of task for which a device is designed" @en
- Entertainment rdfs:label "Entertainment" @en
- EventFunction rdfs:comment "A function that allows to notify about some relevant activity; e.g., that a certain threshold value has been exceeded or that some object has moved." @en
- EventFunction rdfs:label "Event function" @en
- FeatureOfInterest rdfs:comment "A feature of interest represents any real world entity from which a property is measured." @en
- FeatureOfInterest rdfs:label "Feature of interest" @en
- Function rdfs:comment "The functionality necessary to accomplish the task for which a device is designed. A device can be designed to perform more than one function. Functions can be structured in categories (subclasses) that reflect different points of view, for example, considering the specific application area for which a function can be used (e.g., light, temperature, motion, heat, power, etc.), or the capability that a function can support (e.g., receive, reply, notify, etc.), and so forth. " @en
- Function rdfs:label "Function" @en
- Gas rdfs:comment "A type of commodity" @en
- Gas rdfs:label "Gas" @en
- GetCommand rdfs:comment "A type of command" @en
- GetCommand rdfs:label "Get command" @en
- GetCurrentMeterValueCommand rdfs:comment "A type of get command" @en
- GetCurrentMeterValueCommand rdfs:label "Get current meter value command" @en
- GetMeterDataCommand rdfs:comment "A type of get command" @en
- GetMeterDataCommand rdfs:label "Get meter data command" @en
- GetMeterHistoryCommand rdfs:comment "A type of get command" @en
- GetMeterHistoryCommand rdfs:label "Get meter history command" @en
- GetSensingDataCommand rdfs:comment "A type of get command" @en
- GetSensingDataCommand rdfs:label "Get sensing data command" @en
- HVAC rdfs:comment "Heating, Ventilation and Air Conditioning (HVAC) device that provides indoor environmental comfort. A saref:HVAC is typically used to accomplish saref:Comfort." @en
- HVAC rdfs:label "HVAC" @en
- Humidity rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value that is measured in a humidity unit" @en
- Humidity rdfs:label "Humidity" @en
- IlluminanceUnit rdfs:comment "The unit of measure for light" @en
- IlluminanceUnit rdfs:label "Illuminance unit" @en
- LevelControlFunction rdfs:comment "An actuating function that allows to do level adjustments of a property in a certain range (e.g., 0%-100%), such as dimming a light in a room or setting the speed of an electric motor. " @en
- LevelControlFunction rdfs:label "Level control function" @en
- Light rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value that is measured in a illuminance unit (lux)" @en
- Light rdfs:label "Light" @en
- LightSwitch rdfs:comment "A switch that performs the saref:OnOffFunction, controls the property saref:Light, and can be found in the state saref:OnOffState. It can offer a switch on service. A saref:LightSwitch is typically used to accomplish saref:Lighting." @en
- LightSwitch rdfs:label "Light switch" @en
- Lighting rdfs:comment "A type of task for which a device is designed" @en
- Lighting rdfs:label "Lighting" @en
- Measurement rdfs:comment "Represents the measured value made over a property. It is also linked to the unit of measure in which the value is expressed and the timestamp of the measurement." @en
- Measurement rdfs:label "Measurement" @en
- Meter rdfs:comment "A device built to accurately detect and display a quantity in a form readable by a human being. Further, a device of category saref:Meter that performs a saref:MeteringFunction." @en
- Meter rdfs:label "Meter" @en
- MeterReading rdfs:comment "A type of task for which a device is designed" @en
- MeterReading rdfs:label "Meter reading" @en
- MeteringFunction rdfs:comment "A function that allows to get data from a meter, such as current meter reading or instantaneous demand" @en
- MeteringFunction rdfs:label "Metering function" @en
- Motion rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value that is measured in a unit of measure for motion" @en
- Motion rdfs:label "Motion" @en
- MultiLevelState rdfs:comment "A type of state" @en
- MultiLevelState rdfs:label "Multi level state" @en
- NotifyCommand rdfs:comment "A type of command" @en
- NotifyCommand rdfs:label "Notify command" @en
- Occupancy rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value (saref:hasValue property) that is measured in a unit of measure for occupancy" @en
- Occupancy rdfs:label "Occupancy" @en
- OffCommand rdfs:comment "A type of command" @en
- OffCommand rdfs:label "Off command" @en
- OffState rdfs:comment "The state of a device that is Off" @en
- OffState rdfs:label "Off state" @en
- OnCommand rdfs:comment "A type of command" @en
- OnCommand rdfs:label "On command" @en
- OnOffFunction rdfs:comment "An actuating function that allows to switch on and off an actuator" @en
- OnOffFunction rdfs:label "On off function" @en
- OnOffState rdfs:comment "A type of state" @en
- OnOffState rdfs:label "On off state" @en
- OnState rdfs:comment "The state of a device that is On" @en
- OnState rdfs:label "On state" @en
- OpenCloseFunction rdfs:comment "An actuating function that allows to open and close a device" @en
- OpenCloseFunction rdfs:label "Open close function" @en
- OpenCloseState rdfs:comment "A type of state" @en
- OpenCloseState rdfs:label "Open close state" @en
- OpenCommand rdfs:comment "A type of command" @en
- OpenCommand rdfs:label "Open command" @en
- OpenState rdfs:comment "The state of a device that is OPEN " @en
- OpenState rdfs:label "Open state" @en
- PauseCommand rdfs:comment "A type of command" @en
- PauseCommand rdfs:label "Pause command" @en
- Power rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value that is measured in a power unit (such as watt or kilowatt). Further specializations of the saref:Power class can be found in the SAREF4ENER extension, where classes such as PowerMax, PowerMin and PowerExpected are defined." @en
- Power rdfs:label "Power" @en
- PowerUnit rdfs:comment "The unit of measure for power" @en
- PowerUnit rdfs:label "Power unit" @en
- Pressure rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value that is measured in a pressure unit (bar or pascal)" @en
- Pressure rdfs:label "Pressure" @en
- PressureUnit rdfs:comment "The unit of measure for pressure" @en
- PressureUnit rdfs:label "Pressure unit" @en
- Price rdfs:comment "A saref:Property crelated to some measurements that are characterized by a certain value that is measured using saref:Currency" @en
- Price rdfs:label "Price" @en
- Profile rdfs:comment "A specification associated to a device to collect information about a certain Property (e.g., Energy) for optimizing its usage in the home, office or building in which the device is located. This specification is about a certain Property (saref:isAbout), can be calculated over a time span (saref:hasTime) and can be associated to some costs (saref:hasPrice). An example is the Power Profile defined in the SAREF4ENER extension that can be associated to a device for optimizing the Energy efficiency in the home, office or building in which the device is located." @en
- Profile rdfs:label "Profile" @en
- Property rdfs:comment "A quality of a feature of interest that can be measured; an aspect of a feature of interest that is intrinsic to and cannot exist without the feature" @en
- Property rdfs:label "Property" @en
- Safety rdfs:comment "A type of task for which a device is designed" @en
- Safety rdfs:label "Safety" @en
- SensingFunction rdfs:comment "A function that allows to transmit data from sensors, such as measurement values (e.g., temperature) or sensing data (e.g., occupancy)" @en
- SensingFunction rdfs:label "Sensing function" @en
- Sensor rdfs:comment "A device that detects and responds to events or changes in the physical environment such as light, motion, or temperature changes. Further, a device of category saref:Sensor that performs a saref:SensingFunction." @en
- Sensor rdfs:label "Sensor" @en
- Service rdfs:comment "A service is a representation of a function to a network that makes the function discoverable, registerable, remotely controllable by other devices in the network. A service can represent one or more functions. A Service is offered by a device that wants (a certain set of) its function(s) to be discoverable, registerable, remotely controllable by other devices in the network. A Service must specify the device that is offering the service and the function(s) to be represented." @en
- Service rdfs:label "Service" @en
- SetAbsoluteLevelCommand rdfs:comment "A type of set level command" @en
- SetAbsoluteLevelCommand rdfs:label "Set absolute level command" @en
- SetLevelCommand rdfs:comment "A type of command" @en
- SetLevelCommand rdfs:label "Set level command" @en
- SetRelativeLevelCommand rdfs:comment "A type of set level command" @en
- SetRelativeLevelCommand rdfs:label "Set relative level command" @en
- Smoke rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value that is measured in a unit of measure for smoke" @en
- Smoke rdfs:label "Smoke" @en
- SmokeSensor rdfs:comment "A sensor that performs the saref:SensingFunction and the saref:EventFunction, and is used for the purpose of sensing a property of type saref:Smoke. A saref:SmokeSensor is typically used to saref:accomplish saref:Safety." @en
- SmokeSensor rdfs:label "Smoke sensor" @en
- StartCommand rdfs:comment "A type of command" @en
- StartCommand rdfs:label "Start command" @en
- StartState rdfs:comment "The state of a device that is STARTED" @en
- StartState rdfs:label "Start state" @en
- StartStopFunction rdfs:comment "An actuating function that allows to start and stop a device" @en
- StartStopFunction rdfs:label "Start stop function" @en
- StartStopState rdfs:comment "A type of state" @en
- StartStopState rdfs:label "Start stop state" @en
- State rdfs:comment "The state in which a device can be found, e.g, ON/OFF/STANDBY, or ONLINE/OFFLINE. We propose here a list of states that are relevant for the purpose of SAREF, but this list can be extended." @en
- State rdfs:label "State" @en
- StepDownCommand rdfs:comment "A type of command" @en
- StepDownCommand rdfs:label "Step down command" @en
- StepUpCommand rdfs:comment "A type of command" @en
- StepUpCommand rdfs:label "Step up command" @en
- StopCommand rdfs:comment "A type of command" @en
- StopCommand rdfs:label "Stop command" @en
- StopState rdfs:comment "The state of a device that is STOPPED" @en
- StopState rdfs:label "Stop state" @en
- Switch rdfs:comment "A device of category saref:Actuator that performs an actuating function of type saref:OnOffFunction or saref:OpenCloseFunction" @en
- Switch rdfs:label "Switch" @en
- SwitchOnService rdfs:comment "A type of service that represents an on/off function to the network" @en
- SwitchOnService rdfs:label "Switch on service" @en
- Task rdfs:comment "The goal for which a device is designed (from a user perspective). For example, a washing machine is designed for the task of washing. We propose here a list of tasks that are relevant for the purpose of SAREF, but this list can be extended. Tasks can be accomplished by devices (saref:isAccomplishedBy)." @en
- Task rdfs:label "Task" @en
- Temperature rdfs:comment "A saref:Property related to some measurements that are characterized by a certain value that is measured in a temperature unit (degree_Celsius, degree_Fahrenheit, or degree_kelvin)" @en
- Temperature rdfs:label "Temperature" @en
- TemperatureSensor rdfs:comment "A sensor that is used for the purpose of sensing a property of type saref:Temperature. A saref:TemperatureSensor is typically used to saref:accomplish saref:Comfort." @en
- TemperatureSensor rdfs:label "Temperature sensor" @en
- TemperatureUnit rdfs:comment "The unit of measure for temperature" @en
- TemperatureUnit rdfs:label "Temperature unit" @en
- Time rdfs:comment "A class that allows to specify the time concept." @en
- Time rdfs:label "Time" @en
- ToggleCommand rdfs:comment "A type of command" @en
- ToggleCommand rdfs:label "Toggle command" @en
- UnitOfMeasure rdfs:comment "The unit of measure is a standard for measurement of a quantity, such as a Property. For example, Power is a property and Watt is a unit of power that represents a definite predetermined power: when we say 10 Watt, we actually mean 10 times the definite predetermined power called "watt". Our definition is based on the definition of unit of measure in the Ontology of units of Measure (OM). We propose here a list of some units of measure that are relevant for the purpose of SAREF, but this list can be extended, also using some other ontologies rather than the Ontology of units of Measure (OM)." @en
- UnitOfMeasure rdfs:label "Unit of measure" @en
- Washing rdfs:comment "A type of task for which a device is designed" @en
- Washing rdfs:label "Washing" @en
- Water rdfs:comment "A type of commodity" @en
- Water rdfs:label "Water" @en
- WellBeing rdfs:comment "A type of task for which a device is designed" @en
- WellBeing rdfs:label "WellBeing" @en
- accomplishes rdfs:comment "A relationship between a certain entity (e.g., a device) and the task it accomplishes" @en
- accomplishes rdfs:label "accomplishes" @en
- actsUpon rdfs:comment "A relationship between a command and a state" @en
- actsUpon rdfs:label "acts upon" @en
- consistsOf rdfs:comment "A relationship indicating a composite entity that consists of other entities (e.g., a temperature/humidity sensor that consists of a temperature sensor and a humidity sensor)" @en
- consistsOf rdfs:label "consists of" @en
- controlsProperty rdfs:comment "A relationship specifying the property that can be controlled by a certain device" @en
- controlsProperty rdfs:label "controls property" @en
- hasCommand rdfs:comment "A relationship between a function and a command" @en
- hasCommand rdfs:label "has command" @en
- hasDescription rdfs:comment "A relationship providing a description of an entity (e.g., device). The value is expected to be a string or a string with language tag." @en
- hasDescription rdfs:comment "DEPRECATED: The use of rdfs:comment is recommended instead." @en
- hasDescription rdfs:label "has description" @en
- hasFunction rdfs:comment "A relationship identifying the function of a device" @en
- hasFunction rdfs:label "has function" @en
- hasManufacturer rdfs:comment "A relationship identifying the manufacturer of an entity (e.g., device). The value is expected to be a string or a string with language tag." @en
- hasManufacturer rdfs:label "has manufacturer" @en
- hasMeasurement rdfs:comment "A relationship between a feature of interest and a measurement about it" @en
- hasMeasurement rdfs:label "has measurement" @en
- hasMeterReading rdfs:comment "A relationship between a metering function and the measurement of the reading" @en
- hasMeterReading rdfs:label "has meter reading" @en
- hasMeterReadingType rdfs:comment "A relationship identifying the reading type of a metering function (e.g., Water, Gas, Pressure , Energy , Power, etc.)" @en
- hasMeterReadingType rdfs:label "has meter reading type" @en
- hasModel rdfs:comment "A relationship identifying the model of an entity (e.g., device). The value is expected to be a string or a string with language tag." @en
- hasModel rdfs:label "has model" @en
- hasPrice rdfs:comment "A relationship indentifying the price associated to an entity" @en
- hasPrice rdfs:label "has price" @en
- hasProfile rdfs:comment "A relationship associating a profile to a certain device" @en
- hasProfile rdfs:label "has profile" @en
- hasProperty rdfs:comment "A relationship between a feature of interest and a property of that feature" @en
- hasProperty rdfs:label "has property" @en
- hasSensingRange rdfs:comment "A relationship between a sensing function and a measurement identifying the range of a sensor detection" @en
- hasSensingRange rdfs:label "has sensing range" @en
- hasSensorType rdfs:comment "A relationship identifying the sensing type of a sensor detection (i.e., Temperature, Occupancy, Humidity, Motion , Smoke, Pressure, etc.) " @en
- hasSensorType rdfs:label "has sensor type" @en
- hasState rdfs:comment "A relationship identifying the type of state of a device" @en
- hasState rdfs:label "has state" @en
- hasThresholdMeasurement rdfs:comment "A relationship associated with an event function to notify that a certain threshold measurement has been exceeded" @en
- hasThresholdMeasurement rdfs:label "has threshold measurement" @en
- hasTime rdfs:comment "A relationship to associate time information to an entity" @en
- hasTime rdfs:label "has time" @en
- hasTimestamp rdfs:comment "A relationship stating the timestamp of an entity (e.g. a measurement)." @en
- hasTimestamp rdfs:label "has timestamp" @en
- hasTypicalConsumption rdfs:comment "A relationship identifying the typical (energy or power) consumption of a device" @en
- hasTypicalConsumption rdfs:label "has typical consumption" @en
- hasValue rdfs:comment "A relationship defining the value of a certain property, e.g., energy or power. Note that, even if numeric values are expected to enable reasoning, measurement values could use other datatypes." @en
- hasValue rdfs:label "has value" @en
- isAbout rdfs:comment "A relationship identifying what an entity, such as a profile, is about" @en
- isAbout rdfs:label "isAbout" @en
- isAccomplishedBy rdfs:comment "A relationship identifying an entity (e.g., a device) that can accomplish a task." @en
- isAccomplishedBy rdfs:label "is accomplished by" @en
- isCommandOf rdfs:comment "A relationship between a command and a function." @en
- isCommandOf rdfs:label "is command of" @en
- isControlledByDevice rdfs:comment "A relationship specifying the devices that can control a certain property" @en
- isControlledByDevice rdfs:label "is controlled by device" @en
- isMeasuredByDevice rdfs:comment "A relationship specifying the devices that can measure a certain property" @en
- isMeasuredByDevice rdfs:label "is measured by device" @en
- isMeasuredIn rdfs:comment "A relationship identifying the unit of measure used for a certain entity." @en
- isMeasuredIn rdfs:label "is measured in" @en
- isMeasurementOf rdfs:comment "A relationship between a measurement and the feature of interest whose quality was measured" @en
- isMeasurementOf rdfs:label "isMeasurementOf" @en
- isOfferedBy rdfs:comment "A relationship between a service and a device that offers the service" @en
- isOfferedBy rdfs:label "is offered by" @en
- isPropertyOf rdfs:comment "A relationship between a property and the feature of interest it belongs to" @en
- isPropertyOf rdfs:label "is property of" @en
- isUsedFor rdfs:comment "A relationship specifying the commodity for which a device is used for" @en
- isUsedFor rdfs:label "is used for" @en
- makesMeasurement rdfs:comment "A relation between a device and the measurements it makes. Such measurement will link together the value of the measurement, its unit of measure and the property to which it relates." @en
- makesMeasurement rdfs:label "makes measurement" @en
- measurementMadeBy rdfs:comment "A relation between a measurement and the device that made it." @en
- measurementMadeBy rdfs:label "measurement made by" @en
- measuresProperty rdfs:comment "A relationship specifying the property that can be measured by a certain device" @en
- measuresProperty rdfs:label "measures property" @en
- offers rdfs:comment "A relationship between a device and a service" @en
- offers rdfs:label "offers" @en
- relatesToMeasurement rdfs:comment "A relationship between a property and the measurements it relates to" @en
- relatesToMeasurement rdfs:label "relates to measurement" @en
- relatesToProperty rdfs:comment "A relationship between a measurement and the property it relates to" @en
- relatesToProperty rdfs:label "relates to property" @en
- represents rdfs:comment "A relationship between a service and a function." @en
- represents rdfs:label "represents" @en